In Dyson ’s entire product line of leafless fans (Dyson ’s large product line is called environmental appliances), the most versatile feature is the Pure Hot + cool Cryptomic (model HP06), which was released in Shanghai at the end of last year. Dyson Pure Humidify + Cool Cryptomic (hereafter replaced by model PH02) just released in Beijing a few days ago.
The design of the Dyson PH02 is similar to the previous HP06. It is shorter than the TP series. The leafless fan above is not that long, but it is still a family-specific design.
Dyson PH02 is an environmental appliance that integrates air supply, air purification, formaldehyde removal and humidification.
< / p>
In terms of detailed design, Dyson PH02 is actually quite unique, because both TP06 and HP06 have the same design of TP04 and HP04 before, but PH02 can also be seen from the name to be relatively independent at present A model.
Dyson PH02 has been classified into the category of air purification fans because of its ability to purify air. It is not another series of Dyson sterilizers and humidifiers, but in fact PH02 can be said to integrate these two series. stand up.
Evaporative humidification, and then sent to the whole house by airflow technology
< / p>
A water tank similar to the AM series has been added to the bottom of the Dyson PH02 3-in-1 air purification fan. This time Dyson uses the currently popular evaporative humidification, which pumps water to the evaporator to evaporate, and then quickly covers the humid water into the indoor space through the housekeeping Air Amplifier airflow technology.
Dyson PH02 also uses the AM series sterilization technology. The short-wave ultraviolet tube used can kill 99.9% of bacteria in the water, and the remaining bacteria will be captured twice by the screen of the evaporator.
The advantage of evaporation is that it will not spray the minerals and impurities in the water into the air like ultrasonic atomization, and there is no water mist visible to the naked eye.
If it is not pure water, it will inevitably encounter the precipitation of impurities in the water tank for a long time. Therefore, Dyson also prepared a deep cycle cleaning system, even the water tank itself has a cleaning icon Tutorial.
In principle, it is effective to remove formaldehyde, but it must be more conscious and method
Removing formaldehyde is a feature that Dyson has recently valued. Ai Faner also wrote an article before criticizing some users for buying Products with radiation hazards.
How to remove formaldehyde scientifically? At present, there are two common adsorption methods in households, such as activated carbon and green plant purification. The more professional methods are photocatalytic and thermal catalytic oxidation. Where “light touchThe use of media is relatively common.
Dryson’s formaldehyde removal technology Cryptomic uses thermal catalytic oxidation. Using manganese ore as a catalyst, the formaldehyde is oxidized and decomposed into carbon dioxide and water through a manganese potassium ore coating with extremely small channels. Then use Air Amplifier technology to carry out whole house circulation purification.
< / p>
As you can see from the filter structure, the purple layer is the outermost PTFE HEPA filter, the inner side is activated carbon, and the green layer is the formaldehyde removal filter with a manganese potassium coating. .
In addition, Dyson PH02 also has three different built-in sensors, which correspond to particulate matter, volatile organic compounds, and temperature and humidity. Relatively accurate data can be obtained through sensors and a large number of calculation models in the laboratory, and finally the data and curves are displayed on the display.
Of course, for newly renovated houses, the use of environmentally friendly building materials, timely ventilation and drying, scientific determination and removal of harmful substances such as formaldehyde are indispensable. Dyson is more suitable for long-term use after passing the test .
Mastering awareness and methods is more important than technical terms and selling products blindly.
Remote control without apps, applets can do it
It is worth mentioning that the Dyson applet is doing very well right now. After registering the product by scanning the code, you can connect the device to the network in the Dyson Link applet (supporting 2.4GHz / 5GHz WiFi), but the first pairing When you need to take the phone closer, even put it next to the display.
After everything is set up, you can remotely control it through the applet. In addition, even when all functions are turned off, users can continue to observe the indoor temperature, humidity and PM2.5 value by turning on the sensor.
Dyson already understands the Chinese market more and more
Finally, I want to talk about Dyson itself. In fact, Dyson’s strategy for the Chinese market is very clever. This cleverness is not only reflected at the product level, but also reflected in many detailed details, such as why the HP06 launch conference Opened in Shanghai, and PH02 will be held in Beijing. In fact, it shows that Dyson understands China.
Observing the above picture, you can see that both have the functions of air purification and formaldehyde removal, the difference is that HP06 has the function of warm air but does not have the ability to humidify, while PH02 is the reverse, which supports humidification but does not Supports warm air.
The answer is obvious. The temperature in Shanghai in winter is not as warm and comfortable as in Guangdong. The temperature in the Yangtze River Basin as an area without heating is relatively low in winter. The warm air of HP06 can just solve the indoor temperature problem. Indeed, there is basically no need to humidify throughout the year, and even dehumidification is often required.
Although the temperature in Beijing is lower in winter, the indoors are basically covered by heating. Even in some places, the heating is so strong that windows need to be opened for ventilation. Naturally, no warm air is needed. On the contrary, a large number of friends from the south can’t stand the dry climate here, especially the indoors are hot and dry in winter, and the humidification function is even more urgent.
< / p>
A series of products are so accurately cut into different regions, and even the press conferences are held in different places. I have to say that Dyson has a thorough understanding of the market in China.
But for me, definitelyIt is hoped that Dyson can really have a product that can truly integrate all the functions, without having to think too much about the permutation and combination of these functions, and unite them together.
< / p>
In addition, whether it is PH02 or HP06, the colors are only black gold and white gold. In my impression, the Dyson air purification fan is more iconic or silvery white. It can only be said that most people prefer gold. Festive, and silvery white is too cold.
In fact, we can see from the latest products launched by Dyson that the current trend or the improvement direction of each generation is to integrate more and more functions. For Dyson, when the supply air, air purification, formaldehyde removal, and humidification are integrated on one product, there may even be products that integrate warm air. At this time, the air purification fan product line needs Combed again.
The next step for the air purification fan category, and which direction the future products should go, this is what Dyson needs to think about.
▲ HP06 with warm air without humidification
The more integrated functions, it also means that users can use fewer products to implement the function of counting products, although these new products are more expensive in terms of price ( The current Dyson PH02 official price is 6490 Yuan ), but as Dyson gradually launched subsequent iterative products, these products are currently believed to gradually enter a more affordable price range.
Dyson ’s environmental appliances category is actually a good inspiration. For the general public, the impression is that air conditioners are still air conditioners, humidifiers are humidifiers, and purifiers are purifiers. Although each category has been developed for many years, each other Rarely cross.
Dyson uses a separate environmental appliance to control temperature, humidity and air quality at the same time. In fact, it is All in One to solve an ultimate goal-comfort.
Some people may think that Dyson is doing everything, but there is still a long way to go when it comes to the industry top of a single item. But I believe that in the future, it will no longer be to turn on every home appliance. Whether it is through the linkage of AI and smart home, or the integration of as many functions as possible in its own way, such as Dyson, all are moving forward to further create a comfortable environment.
If only one machine makes you more comfortable, Dyson is the fastest in this regard.